Shroud Covers by Model

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool.

Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

  • Shroud comes with a zipper
  • Genuine adhesive VELCRO® tape included
  • Shock absorber cover included
  • Hand made with a very strict quality inspection
  • Easy installation
  • MADE IN EUROPE

Short video instruction for shroud by model installation:

– Before applying VELCRO® to the chassis, cut the tape to the necessary length and width. For example, to place VELCRO® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width.
– Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process).
– Let the VELCRO® tape adhere to the chassis for 24 hours before you use the shroud.
– If it’s hot outside, leave the Dusty Motors’ shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris.
– When it’s hot outside – or if you have a car gearing set up that’s capable of reaching the speed of light – be smart when you bash. Don’t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature.
– When bashing in winter, don’t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics.
– Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can’t be breathable and 100 percent waterproof at the same time. Physics just doesn’t work that way. The splashes of water are OK, so don’t be concerned if the shroud gets a bit damp.
– Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.
– If you like the Dusty Motors shroud, recommend it to your friends. You’ll all have a great time bashing together.
– Go in together and purchase Dusty Motors shrouds with your friends. You’ll save on shipping costs.

  • Traxxas X-Maxx Shock absorber cover

    Fits: Traxxas X-Maxx only.
    Shipping weight: 30 grams
    Clear selection
    7.99 €
  • Traxxas X-Maxx Protection cover (shock covers not included)

    Fits: Traxxas X-Maxx only.
    Scale: 1/6
    Shipping weight: 99 grams
    Clear selection
    27.99 €
  • Traxxas Stampede/Telluride 4×4 VXL Protection Cover

    Fits: Traxxas Stampede 4x4 and Telluride 4x4 only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas Slash 4×4/Rally LCG Chassis Protection Cover

    Fits: Traxxas Slash 4x4 with LCG chassis and 1/10 Rally only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas Slash 4×4 (HCG Chassis) Protection Cover

    Fits: Traxxas Slash 4x4 with HCG chassis only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas Slash 2WD With HCG Chassis Protection Cover

    Fits: Traxxas Slash 2WD With HCG Chassis only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas Slash 2WD LCG Chassis Protective Cover

    Fits: Traxxas Slash 2WD with LCG chassis only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas Rustler / Bandit Protection Cover

    Fits: Traxxas Rustler/Bandit models only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas E-Revo/Summit Protective Cover

    Fits: Traxxas E-Revo/Summit and some Thunder Tiger models.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas E-Maxx Protection Cover

    Fits: Traxxas E-Maxx only.
    Scale: 1/10
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Traxxas 1/16 Scale Models Protection Cover

    Fits: Traxxas 1/16 scale models only.
    Scale: 1/16
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Thunder Tiger MT4/ST4/ER4 Protection Cover

    Fits: Thunder Tiger MT4/ST4/ER4 and Traxxas E-Revo/Summit models.
    Scale: 1/8
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Shock absorber cover

    Fits: 1/16 to 1/8 scale.
    Shipping weight: 30 grams
    Clear selection
    5.99 €
  • LaTrax Rally/SST/Teton Chassis Protective Cover (shock covers not included)

    Fits: LaTrax Rally/SST/Teton only.
    Scale: 1/18
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • HPI Savage Flux HP Protection Cover

    Fits: HPI Savage Flux and XL models only.
    Scale: 1/8
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Genuine Velcro adhesive tape. “Hook” part only

    Width: 16mm
    Length: 1, 3 or 5 meters
    Shipping weight: 99 grams
    Clear selection
  • Arrma Nero/Fazon/Big Rock protection cover (shock covers not included)

    Fits: Arrma Nero/Fazon/Big Rock only.
    Scale: 1/8
    Shipping weight: 99 grams
    Clear selection
    23.99 €
  • Arrma Kraton/Talion protection cover (shock covers not included)

    Fits: Arrma Kraton/Talion only.
    Scale: 1/8
    Shipping weight: 99 grams
    Clear selection
    23.99 €
Shipping Information

Orders are dispatched same or next business day, so you’ll get your order as quickly as possible.

Postage and packaging

Up to 100 grams – 3.99 EUR
Up to 500 grams – 5.99 EUR
Up to 2000 grams – 15.99 EUR
Over 2000 grams – 49.99 EUR

Delivery time

Europe 1-3 weeks (average 12 days)
USA 2-5 weeks (average 20 days)
Read more